|Place of Origin:||China|
|Minimum Order Quantity:||1set|
|Packaging Details:||Standard packing|
|Payment Terms:||L/C, T/T, D/P, T/T, Western Union, MoneyGram|
|Type:||Virtual Reality System||Product Name:||STEPVR UAV|
|Brand Name:||STEPVR||Training And Installation:||Overseas Service Is Available|
|Modle:||SVR1712011||Installation Cycle:||30 Days (working Day)|
STEPVR Virtual Reality System Laser Large Space Motion Capture System
Laser Space Positioning Technology For UAV
The UAV real-time positioning solutions is the use of large space laser positioning system with high precision, the laser positioning system based on large space positioning using high precision space positioning laser transmitting station with independent research and development of nine axis attitude fusion algorithm can accurately construct the UAV 3D spatial position information, realize the UAV position and attitude the capture of the information, the real-time data of open source SDK, support MotionBuilderUnityUnreal, UAV intelligent control power tools leading research areas, allows researchers to focus more on the control. When there is no GPS signal in the indoor environment, we can only pay attention to other systems. The UAV is compact, flexible and highly mobile. It requires that the measurement system can collect objects with high speed and small volume. The characteristics of the laser large space positioning and motion capture system are well covered.
|Type||Virtual Reality System|
|Product Name||STEPVR UAV|
|Place Of Origin||Beijing, China (Mainland)|
|Training And Installation||Overseas Service Is Available|
|Installation Cycle||30 Days (Working Day)|
The Advantage Of Scheme
This is the principle of the laser positioning space, a plurality of laser emission device installed inside the space laser on space launch two directions anyway fire, and placed in a plurality of laser induction receiver is positioned on the object, through the calculation of two beams of light to reach the object positioning angle, so as to obtain the 3D coordinates of the object the object, when moving 3D coordinates will also change, has been completed action to capture the motion information.
Therefore, the laser large space motion capture system does not collect the three-dimensional coordinates of multi rotor UAVs, but is the standard action and motion trap fixed on multi rotor UAVs, and then gets the position data of UAVs. When there is more than one multi rotor UAV in the space, it is easy to distinguish multiple rotor-wing UAVs by different traps.
Advantage one: operation data is excellent, avoiding complex program operation, so the reaction speed is very fast, almost no delay, at the same time, it can support multiple target location, and mobile range is wide.
Advantage two: high positioning precision, with millimeter level positioning accuracy, will not be unable to locate because of occlusion, high tolerance.
Advantage three: data stability, laser positioning large space real-time tracking and scanning of multi rotor unmanned aerial vehicle tracker, tracking data will not be lost.
Advantage four: multi cell without interference, because the operation mode is independent, because large space range can run multiple UAVs at the same time, at the same time, patrol and do not interfere with shielding.
Real Time Positioning
The multi rotor unmanned aerial vehicle (UAV) is identified in the software of the laser large space motion capture system based on different ID. The multi rotor UAV's flight generated the change of the space position. According to the 9 axis attitude fusion algorithm, the real-time and 1:1 precise action restoration was realized, mapping in the software, that is, the real-time change of six degree of freedom data. Six Degrees of Freedom (6DoF), that is, six degrees of freedom, including three-dimensional space XYZ axis coordinates, yaw angle Yaw, roll angle Roll, and pitching angle Pitch. These data can be previewed in real time and can be broadcast out in real time.
Real Time Correction
The real time six degree of freedom data transfer from multi rotor UAV to flight control system (referred to as flight control system) is used as a practical reference data to correct the trajectory of multi rotor UAV and ensure that it flies on a pre established route. Multi - rotor unmanned aerial vehicles (UAVs) fly in accordance with the specified trajectory or data, forming a neat formation flight effect.
The use of large space in Wantong laser positioning technology, real-time tracking of UAV space position and attitude, to create a set of multi rotor UAV flight trajectory positioning solution has high cost, anti-jamming, high precision and stability, synchronous tracking multiple targets, real-time six degree of freedom data flow advantages.
Standard Positioning And Motion Capture Unit
Hardware Configuration Table
KSQ Technologies (Beijing) Co. Ltd. is the Overseas Business Partner of G-Wearables.
G-Wearables was founded in 2013. The core team of the company consists of top technology researchers and trend marketers. The company is focused on laser positioning research and development for applications such as virtual reality, motion capture, multi-person interaction and so on.
Do not hesitate to contact us if you have any interest or any questions. We are looking forward to have a successful business relationship with you in the nearly future.
1. Preliminary scheme design.
2. Project recommendations and content matching.
3. Software upgrade and technical support.
4. 24 hours fast response.
Packaging:VR BOX with orignal packge,Pls don't worry!
By Fedex: 3-5 days
By DHL: 3-5 days
By UPS: 3-5 days
By EMS: 7-15 days
By TNT: 5-10 days
By HK Post: 10-15 days
By CN Post: 10-30 days17 Newest high quality Virtual Reality 3D VR shinecon Glasses Box, VR Headset for film
Skype ID: 7576fe846edb599f
Mob No.:+86 18702503435(whatsapp)
Address:Rm 9-616, No.10 Zhenxing Road(MDQ Plaza),Changping District, Beijing,China,102200
Contact Person: sales